Share:

Pipelife supplies record-breaking HDPE cable ducts for East Anglia TWO wind farm

16. November 2026 | 3 min read

Pipelife Norway has set a new world record in pipe manufacturing, producing two nearly 1.8-kilometer-long continuously extruded HDPE pipes. The OD800 ducts were produced for the East Anglia TWO offshore wind farm, supporting reliable power transmission between the offshore facilities and the onshore network.

Several continuously extruded long-length pipes near Pipelife's production facility in Stathelle.

Seamless extrusion: Unlocking opportunities for challenging infrastructure applications

In July 2026, Pipelife Norway’s specialized facility in Stathelle completed a historic achievement: producing a nearly 1.8-kilometer-long HDPE pipe in a single extrusion. The occasion sets a new global record, surpassing the previous record of 1,504 meters, also held by Pipelife.

“Producing a pipe through continuous extrusion eliminates the need for welded joints, resulting in a more robust and reliable solution,” says Martin Myhre, Project Manager at Pipelife Norway. “Secondly, the pipes are delivered to site in continuous lengths by sea towage, making the solution particularly well suited to sites with limited space and environmental restrictions. These are the longest pipes Pipelife has ever manufactured, making it a significant milestone.”

In total, two OD800 cable ducts, measuring 1,793 and 1,781 meters, were produced for the East Anglia TWO offshore wind farm, developed by ScottishPower Renewables and located 33 kilometers from the Suffolk coast, England. The ducts will provide a protected pathway for the high-voltage export cables, supplying energy from the wind farm to shore.

A 1.8-kilometer-long cable duct is towed from Stathelle to the installation site.

Challenging installation beneath the coastline

Each duct was transported from Stathelle to the installation site in Thorpeness by tow, requiring close collaboration and careful planning among project partners. The 889-kilometer-long journey was completed in four days.

At landfall, horizontal directional drilling (HDD) was used to safely drill beneath the Suffolk coastline and seabed. HDD is a trenchless installation method that allows drilling deep beneath the ground to create an underground bore without excavation in beaches, dunes, cliffs or coastal habitats, minimizing disruption to the environment and sensitive landscapes.

The record-breaking installation was performed by the principal contractor OCU Group, with support from its subsidiary Peter McCormack & Sons.

“Delivering a landfall HDD of this scale is an exceptional engineering achievement, demanding meticulous planning, technical expertise and close collaboration. Successfully installing two 1,800-meter, 800-mm diameter PE pipes, each in a single continuous section, is testament to the skill and commitment of everyone involved,” states Mike McNulty, HDD Director at OCU Group.

An aerial photo of a continuously extruded long-length HDPE pipe.

Clean energy to one million households

The first of the windfarm’s high-voltage export cables is expected to be installed in summer 2027, with the windfarm working towards commercial operation in late 2028. The 960-MW operational capacity of East Anglia TWO will provide clean, homegrown energy to nearly one million households in the UK.

“Landfall works are known to be one of the most technically challenging aspects of building an offshore windfarm, but thanks to precision planning and a great partnership with our principal contractor OCU Group and duct manufacturer Pipelife, this program has well and truly hit the mark — breaking the UK and world records in the process,” says Ross Ovens, Managing Director for Offshore at ScottishPower Renewables.

A close up of long-length HDPE pipes being extruded in the sea.

World-leading piping solutions for coastal and offshore applications

Continuously extruded long-length pipes are favored in various offshore and nearshore applications for requiring no onshore storage and little to no welding, while ensuring highly reliable performance.

Pipelife’s factory in Stathelle, Norway, is a specialist facility, purpose-built to produce HDPE pipes in large diameters and extremely long lengths. The pipes are extruded into a fjord and towed directly to the installation site. 

With over 30 years of experience, Pipelife has delivered long-length pipes to clients’ marine construction sites in Europe, Africa, North and South America and Asia.

Several continuously extruded long-length pipes near Pipelife's production facility in Stathelle.

Get in Touch

Please choose your preferred way to get in contact with us. We will get back to you as soon as possible.

Frequently Downloaded

Find here the most popular downloads

Download Center
Did you not find what you are looking for?

Find a country near you

Get in Touch

Please fill out our contact form and we’ll get back to you as soon as possible.

Form service
Provide your details below and we’ll be in touch!