Versatile prefabricated products enable fast, painless installations of hydronic systems. Pipelife prefab setups span a wide range of heating and cooling applications and stages of building development.
When combined with our design service, prefab product systems are perfectly aligned with your property — ensuring error-free installations and avoiding excess waste.
UNDERFLOOR HEATING MATS
Our prefabricated underfloor heating mats are delivered in ready-to-use rolls. Produced under highly controlled factory conditions, the mats ensure safe and error-free installation — simply unroll, fix to the floor and connect to the manifold. Every mat is designed and pre-assembled according to your project’s exact specifications and incorporates all connections to and from the manifolds, eliminating the need for additional fittings.
GYPSUM WALL HEATING & COOLING PANELS
Prefab gypsum panels are a great way to save time and resources when installing a hydronic heating and cooling system. The panels come pre-assembled in a variety of dimensions to fit your space and are simply fixed to the wall or ceiling before being plastered over for a smooth, aesthetic finish.
SUSPENDED CEILING COOLING
We also offer prefabricated solutions that allow for additional ceiling fixtures, such as ventilation units or electrical wires. Our suspended ceiling cooling panels come pre-assembled and are easily slotted between drop-ceiling substructures that hang below the main ceiling for fast, efficient and failsafe installation.
CONCRETE CORE ACTIVATION
During the initial construction phase, you can enjoy further efficiencies by integrating prefab hydronic systems into your building’s concrete slabs. Our prefab setups are tailored to your layout design with pre-positioned and secured pipes that simply require concrete to be poured on top.
Our prefab manifold cabinets come pressure tested and fully pre-assembled, including all components and pipe connections. They can be easily connected to corresponding products by a single installer and immediately put into operation. With our manifold configurator, we offer various combinations of manifolds, cabinets and connections to ensure your system is customized to your needs.
BENEFITS OF PREFABRICATED HYDRONIC SYSTEMS
Our prefab range can save up to 90% of installation time. Products come fully pre-assembled with the necessary fittings and fixings — they simply require mounting to the intended surface and connecting to the manifold or power source.
Prefabrication helps you adapt to the global skilled labor shortage. Our prefab products are delivered fully preassembled for fast and straightforward installation — opening the process up to installers of all experience levels.
Our prefab products are produced under strict factory settings to ensure optimal assembly and reduce the likelihood of installation errors.
From retrofitting residential properties to embedding concrete core activation into industrial new builds, our prefab solutions cover the full spectrum of heating and cooling requirements and applications.
OPTIMIZED LAYOUT DESIGN
Our designers can save you time and resources with tailor-made product systems. Upon determining the most suitable solution for your space, we provide heat loss calculations, product specifications, pipe dimensions, and technical drawings to aid installation.
All products are made to measure in advance, avoiding the need for on-site alterations and ensuring material waste is kept to a minimum.
Prefabricated hydronic systems comprise heating and cooling products that have been pre-assembled to streamline on-site installation. This can save up to 90% of installation time as products are ready to implement upon delivery.
The main advantage prefabricated hydronic systems have over standard setups is the reduction in on-site installation time. As prefab systems come fully pre-assembled with all necessary fittings and fixings, installers can simply mount them to the desired surface and make the relevant connections. Not only does this save time, it also reduces material waste as all products have been made to measure in advance.
Pipelife prefab setups also provide peace of mind. All product systems are assembled under strict factory conditions to reduce the possibility of installation errors and ensure the longevity and reliability of our hydronic systems.
As Pipelife prefab hydronic systems are suitable for a wide variety of heating and cooling settings, installation times vary according to your specific setup. However, our prefab products can save up to 90% of installation time compared to standard setups as they come fully pre-assembled with all necessary fittings. Installers can simply mount product systems onto the desired surface and make the required connections.
Yes, Pipelife prefab hydronic systems are well-suited to a variety of outdoor applications. For example, our prefab concrete core activation setups are delivered with pre-positioned and secured pipes that simply require concrete to be poured on top — perfect for keeping public and residential areas ice-free.
To optimize your prefab setup, we offer a comprehensive design service that ensures your prefab hydronic systems perfectly align with your property.
We can develop a layout proposal to determine how the various systems can be best utilized in your space, providing heating-efficiency calculations, energy-saving estimates, and complete product and accessory specifications.
We can then supply bespoke prefab products that have been customized to your needs and are ready to be installed upon delivery.
Yes, prefabricated systems are well-suited to energy renovation projects. For example, our gypsum panels are a fast and easy way of implementing a hydronic heating and cooling solution without invasive construction. The panels come fully pre-assembled and are easily fitted onto walls or ceilings before being plastered over for a smooth, aesthetic finish.
With manifolds, gypsum and suspended ceiling panels, underfloor heating mats, and concrete core activation setups, Pipelife prefab products cover the full spectrum of hydronic heating and cooling. Our diverse range provides options for domestic energy renovation projects and industrial-scale developments alike. Prefabricated systems aren’t limited to indoor settings either, with applications for sports field turf conditioning as well as snow and ice melting in public and residential spaces.
Our prefab hydronic setups are competitively priced in each local market. They are bespoke solutions designed to the custom requirements of your building, and the price varies accordingly. Please get in touch with your local Pipelife partner for a detailed offer.
Our prefab hydronic systems can be bought directly from your local Pipelife partner. We are present in over 20 European countries, all of whom will be happy to field any of your purchasing inquiries. For more details, see the list of our operating countries at the bottom of the page or click here.
PICK UP THE PACE
Discover how prefabricated hydronic systems are streamlining underfloor heating installations across Europe.